Forum openmoko-fr.org

/etc/wpa_supplicant/wpa_supplicant.conf

ifup eth0

wpa_supplicant -i eth0 -c /etc/wpa_supplicant/wpa_supplicant.conf -B

udhcpc eth0

ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1

# WPA2:
network={
       ssid='your ssid'
       scan_ssid=1
       proto=RSN
       key_mgmt=WPA-PSK
       pairwise=CCMP TKIP
       group=TKIP CCMP
       psk='secret key'
       priority=50
}

# WPA:
network={
      ssid='your_ssid'
      scan_ssid=1
      psk='secret key'
      priority=10
}

# WEP:
network={
     ssid='your_ssid'
     scan_ssid=1
     key_mgmt=NONE
     wep_tx_keyidx=0
     wep_key0='secret key'
     priority=8
}

# Open:
network={
     ssid='your ssid'
     key_mgmt=NONE
     priority=5
}

#!/bin/sh
#
# wlan    This shell script starts and stops wlan.
#
# processname: wlan

# Source function library.
#. /etc/rc.d/init.d/functions
# 'written' by HdR

RETVAL=0
prog='wlan'

# test -f /etc/default/$prog && . /etc/default/$prog

start() {
    echo -n 'Starting $prog: '
    ifconfig eth0 up
    wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf -B
    sleep 10
    udhcpc eth0
    RETVAL=$?
    return $RETVAL
}

stop() {
    # Stop daemons.
    echo -n 'Shutting down $prog: '
        killall wpa_supplicant
    ifconfig eth0 down
#        killproc gpsd
    RETVAL=$?
    return $RETVAL
}

# See how we were called.
case '$1' in
  start)
    start
    ;;
  stop)
    stop
    ;;
  restart|reload)
    stop
    start
    RETVAL=$?
    ;;
  *)
    echo 'Usage: $0 {start|stop|restart}'
    exit 1
esac

exit $RETVAL

iface eth0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf