Forum openmoko-fr.org

Forum de la communauté francophone autour du projet OpenMoko

Vous n'êtes pas identifié.

Annonce

Bienvenue sur ce forum.

Face à un afflux de spammers, les inscriptions ont été désactivée.
Si vous souhaitez vous inscrire, il faudra en faire la demande auprès du webmaster (voir la section "Contact" sur le Blog).

#1 29-04-2009 07:04:49

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

echec a l'installation de debian

salut
j'essaie depuis 24 d'installer debian en utilisant tout les mirrors possible. meme sans et j'ai toujours le meme resutal:

j'ai lance le script comme ceci:

Code:

SD_SWAP_SIZE=32 DASH_BINSH=false ./install.sh all

j'ai essaye aussi avec  INST_MIRROR=http://ftp.fr.debian.org/debian ./install.sh all
mais rien a faire

Code:

P: Configuring helper cdebootstrap-helper-apt
E: Internal error: install

quand je tente ./install.sh debian juste pour relance l'etape debian j'ai la meme erreur.

Hors ligne

 

#2 29-04-2009 10:52:50

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

Peut-être un pb temporaire sur l'archive unstable de debian.
Sinon, par acquis de conscience il faut vérifier avec dmesg que ce n'est pas la carte microSDHC qui pose problème. Par exemple, après un plantage de l'installation :

Code:

$ dmesg | grep -i glamo

Hors ligne

 

#3 29-04-2009 11:05:48

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon apres installation shr j'ai le meme proble au niveau de cdebootstrap-helper-apt. je me demande pourquoi c'est la que ca echoue? peut ont sauter ce packet?

Code:

root@om-gta02 ~ $ dmesg |grep -i glamo

me donne rien
mais

Code:

dmesg

tout seul donne:

Code:

btusb_send_frame: hci0 urb c7184120 submission failed
[   26.500000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
[   26.765000] mmc1: card 0001 removed
[   26.795000] ar6000_wow interrupt
[   26.970000] s3c2440-sdi s3c2440-sdi: powered down.
[   26.970000] s3c2440-sdi s3c2440-sdi: powered down.
[   29.165000] modem wakeup interrupt
[  180.300000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[  180.300000] mapped channel 0 to 0
[  180.330000] s3c2440-sdi s3c2440-sdi: powered down.
[  180.330000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[  180.340000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[  180.345000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[  180.350000] s3c2440-sdi s3c2440-sdi: initialisation done.
[  180.360000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[  180.365000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[  180.400000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[  180.415000] mmc1: queuing CIS tuple 0x01 length 3
[  180.440000] mmc1: queuing CIS tuple 0x1a length 5
[  180.455000] mmc1: queuing CIS tuple 0x1b length 8
[  180.455000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[  180.465000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
[  180.475000] mmc1: queuing CIS tuple 0x80 length 1
[  180.475000] mmc1: queuing CIS tuple 0x81 length 1
[  180.475000] mmc1: queuing CIS tuple 0x82 length 1
[  180.490000] mmc1: new SDIO card at address 0001
[  181.560000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[  181.565000] eth0 (sdio_ar6000): not using net_device_ops yet
[  181.640000] AR6000 Reg Code = 0x40000060
[  191.855000] eth0: no IPv6 routers present
[  541.980000] Alignment trap: openmoko-contac (3643) PC=0x402e9cc8 Instr=0xe5900000 Address=0x00000001 FSR 0x013
[  758.295000] Alignment trap: openmoko-messag (4448) PC=0x40106104 Instr=0xe7920104 Address=0x00000001 FSR 0x013
[  800.085000] fbcon_event_notify action=9, data=c7069de8
[  800.085000] jbt6k74 spi2.0: **** jbt6k74 vsync suspend
[  801.940000] fbcon_event_notify action=12, data=c7069dac
[  801.940000] jbt6k74 spi2.0: **** jbt6k74 unblank
[  802.010000] fbcon_event_notify action=9, data=c7069de8
[  802.010000] jbt6k74 spi2.0: **** jbt6k74 unblank
[  883.160000] fbcon_event_notify action=9, data=c7069de8
[  883.160000] jbt6k74 spi2.0: **** jbt6k74 vsync suspend
[  994.290000] fbcon_event_notify action=12, data=c7069dac
[  994.290000] jbt6k74 spi2.0: **** jbt6k74 unblank
[  994.360000] fbcon_event_notify action=9, data=c7069de8
[  994.360000] jbt6k74 spi2.0: **** jbt6k74 unblank
[ 1035.175000] fbcon_event_notify action=9, data=c7069de8
[ 1035.175000] jbt6k74 spi2.0: **** jbt6k74 vsync suspend
[ 1131.160000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
[ 1131.170000] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ 1133.250000] fbcon_event_notify action=12, data=c7069dac
[ 1133.250000] jbt6k74 spi2.0: **** jbt6k74 unblank
[ 1133.320000] fbcon_event_notify action=9, data=c7069de8
[ 1133.320000] jbt6k74 spi2.0: **** jbt6k74 unblank
[ 1133.660000] pcf50633 0-0073: usb curlim to 500 mA
[ 1142.065000] usb0: no IPv6 routers present
[ 1844.725000] pcf50633-rtc pcf50633-rtc: RTC_TIME: 29.3.109 7:16:45
[ 1844.725000] pcf50633-rtc pcf50633-rtc: PCF_TIME: 29.04.09 07:16:45
[ 1844.735000] pcf50633 0-0073: Masking IRQ 6
[ 1844.765000] pcf50633 0-0073: Unmasking IRQ 6
[ 1844.785000] pcf50633 0-0073: Masking IRQ 7
[ 1844.805000] pcf50633 0-0073: Masking IRQ 7
[ 2428.370000]  mmcblk0: p1 p2 p3
[ 2430.580000]  mmcblk0: p1 p2 p3
[ 2431.960000] kjournald starting.  Commit interval 5 seconds
[ 2431.970000] EXT3 FS on mmcblk0p2, internal journal
[ 2431.970000] EXT3-fs: mounted filesystem with ordered data mode.
[ 2436.975000] kjournald starting.  Commit interval 5 seconds
[ 2436.995000] EXT3 FS on mmcblk0p2, internal journal
[ 2437.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 2529.290000] kjournald starting.  Commit interval 5 seconds
[ 2529.330000] EXT3 FS on mmcblk0p2, internal journal
[ 2529.330000] EXT3-fs: mounted filesystem with ordered data mode.
[ 2814.110000]  mmcblk0: p1 p2
[ 2816.180000]  mmcblk0: p1 p2
[ 2818.155000] kjournald starting.  Commit interval 5 seconds
[ 2818.165000] EXT3 FS on mmcblk0p2, internal journal
[ 2818.165000] EXT3-fs: mounted filesystem with ordered data mode.
[ 2821.510000] kjournald starting.  Commit interval 5 seconds
[ 2821.525000] EXT3 FS on mmcblk0p2, internal journal
[ 2821.525000] EXT3-fs: mounted filesystem with ordered data mode.
[ 2907.005000] xset: page allocation failure. order:1, mode:0x20
[ 2907.005000] [<c002dcac>] (dump_stack+0x0/0x14) from [<c007b03c>] (__alloc_pages_internal+0x38c/0x3ac)
[ 2907.005000] [<c007acb0>] (__alloc_pages_internal+0x0/0x3ac) from [<c009a74c>] (cache_alloc_refill+0x2a8/0x564)
[ 2907.005000] [<c009a4a4>] (cache_alloc_refill+0x0/0x564) from [<c009a46c>] (kmem_cache_alloc+0x6c/0xa4)
[ 2907.005000] [<c009a400>] (kmem_cache_alloc+0x0/0xa4) from [<c0211218>] (sk_prot_alloc+0x28/0xe4)
[ 2907.005000]  r7:c71d8040 r6:c7814860 r5:c37bd660 r4:c03953f8
[ 2907.005000] [<c02111f0>] (sk_prot_alloc+0x0/0xe4) from [<c0212190>] (sk_clone+0x1c/0x2d0)
[ 2907.005000]  r6:c71d8040 r5:c37bd660 r4:00000000
[ 2907.005000] [<c0212174>] (sk_clone+0x0/0x2d0) from [<c0248294>] (inet_csk_clone+0x18/0x90)
[ 2907.005000]  r7:c37bd660 r6:c71d8040 r5:c37bd660 r4:00000000
[ 2907.005000] [<c024827c>] (inet_csk_clone+0x0/0x90) from [<c025d78c>] (tcp_create_openreq_child+0x20/0x384)
[ 2907.005000]  r5:c37bd660 r4:00000000
[ 2907.005000] [<c025d76c>] (tcp_create_openreq_child+0x0/0x384) from [<c025b71c>] (tcp_v4_syn_recv_sock+0x60/0x1e0)
[ 2907.005000] [<c025b6bc>] (tcp_v4_syn_recv_sock+0x0/0x1e0) from [<c025d59c>] (tcp_check_req+0x258/0x428)
[ 2907.005000]  r8:c73bd4b0 r7:00001000 r6:c71d8040 r5:c37bd660 r4:00000000
[ 2907.005000] [<c025d344>] (tcp_check_req+0x0/0x428) from [<c025ae7c>] (tcp_v4_do_rcv+0x1d4/0x30c)
[ 2907.005000] [<c025aca8>] (tcp_v4_do_rcv+0x0/0x30c) from [<c025d1d0>] (tcp_v4_rcv+0x6fc/0x768)
[ 2907.005000] [<c025cad4>] (tcp_v4_rcv+0x0/0x768) from [<c023e838>] (ip_local_deliver_finish+0x18c/0x290)
[ 2907.005000] [<c023e6ac>] (ip_local_deliver_finish+0x0/0x290) from [<c023ed68>] (ip_local_deliver+0x90/0xa4)
[ 2907.005000]  r6:c08f9d60 r5:c725db20 r4:c725db20
[ 2907.005000] [<c023ecd8>] (ip_local_deliver+0x0/0xa4) from [<c023e67c>] (ip_rcv_finish+0x394/0x3c4)
[ 2907.005000]  r4:c73bd49c
[ 2907.005000] [<c023e2e8>] (ip_rcv_finish+0x0/0x3c4) from [<c023eca0>] (ip_rcv+0x25c/0x294)
[ 2907.005000] [<c023ea44>] (ip_rcv+0x0/0x294) from [<c021c368>] (netif_receive_skb+0x324/0x3a0)
[ 2907.005000]  r7:c03967cc r6:c725db20 r5:c08fa2b4 r4:00000008
[ 2907.005000] [<c021c044>] (netif_receive_skb+0x0/0x3a0) from [<c021c874>] (napi_gro_receive+0x3c/0x54)
[ 2907.005000] [<c021c838>] (napi_gro_receive+0x0/0x54) from [<c021c958>] (process_backlog+0x90/0xe4)
[ 2907.005000]  r4:c08fa26c
[ 2907.005000] [<c021c8c8>] (process_backlog+0x0/0xe4) from [<c021f028>] (net_rx_action+0x78/0x16c)
[ 2907.005000]  r7:c03dba60 r6:c4a42000 r5:00000040 r4:c08fa26c
[ 2907.005000] [<c021efb0>] (net_rx_action+0x0/0x16c) from [<c0048618>] (__do_softirq+0x70/0x118)
[ 2907.005000] [<c00485a8>] (__do_softirq+0x0/0x118) from [<c004870c>] (do_softirq+0x4c/0x58)
[ 2907.005000] [<c00486c0>] (do_softirq+0x0/0x58) from [<c00487a4>] (local_bh_enable_ip+0x8c/0xbc)
[ 2907.005000]  r4:c6a760ac
[ 2907.005000] [<c0048718>] (local_bh_enable_ip+0x0/0xbc) from [<c02981ec>] (_spin_unlock_bh+0x3c/0x40)
[ 2907.005000]  r4:c6a760ac
[ 2907.005000] [<c02981b0>] (_spin_unlock_bh+0x0/0x40) from [<c0210acc>] (release_sock+0xbc/0xc0)
[ 2907.005000]  r5:c6a76080 r4:00000000
[ 2907.005000] [<c0210a10>] (release_sock+0x0/0xc0) from [<c026a058>] (inet_stream_connect+0x144/0x280)
[ 2907.005000]  r7:c4a42000 r6:ffffff8d r5:c6a76080 r4:7fffffff
[ 2907.005000] [<c0269f14>] (inet_stream_connect+0x0/0x280) from [<c020fb2c>] (sys_connect+0x78/0x98)
[ 2907.005000] [<c020fab4>] (sys_connect+0x0/0x98) from [<c0029e40>] (ret_fast_syscall+0x0/0x2c)
[ 2907.005000]  r7:0000011b r6:00000010 r5:be8f15f4 r4:00017708
[ 2907.005000] Mem-info:
[ 2907.005000] Normal per-cpu:
[ 2907.005000] CPU    0: hi:   42, btch:   7 usd:   7
[ 2907.005000] Active_anon:2812 active_file:1005 inactive_anon:5569
[ 2907.005000]  inactive_file:16683 unevictable:0 dirty:1225 writeback:0 unstable:0
[ 2907.005000]  free:496 slab:2537 mapped:1859 pagetables:181 bounce:0
[ 2907.005000] Normal free:1984kB min:1440kB low:1800kB high:2160kB active_anon:11248kB inactive_anon:22276kB active_file:4020kB inactive_file:66732kB unevictable:0kB present:130048kB pages_scanned:0 all_unreclaimable? no
[ 2907.005000] lowmem_reserve[]: 0 0
[ 2907.005000] Normal: 460*4kB 0*8kB 1*16kB 2*32kB 1*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1984kB
[ 2907.005000] 17790 total pagecache pages
[ 2907.005000] 0 pages in swap cache
[ 2907.005000] Swap cache stats: add 0, delete 0, find 0/0
[ 2907.005000] Free swap  = 0kB
[ 2907.005000] Total swap = 0kB
[ 2907.005000] 32768 pages of RAM
[ 2907.005000] 683 free pages
[ 2907.005000] 2686 reserved pages
[ 2907.005000] 2537 slab pages
[ 2907.005000] 19993 pages shared
[ 2907.005000] 0 pages swap cached
[ 2907.120000] xset: page allocation failure. order:1, mode:0x20
[ 2907.120000] [<c002dcac>] (dump_stack+0x0/0x14) from [<c007b03c>] (__alloc_pages_internal+0x38c/0x3ac)
[ 2907.120000] [<c007acb0>] (__alloc_pages_internal+0x0/0x3ac) from [<c009a74c>] (cache_alloc_refill+0x2a8/0x564)
[ 2907.120000] [<c009a4a4>] (cache_alloc_refill+0x0/0x564) from [<c009a46c>] (kmem_cache_alloc+0x6c/0xa4)
[ 2907.120000] [<c009a400>] (kmem_cache_alloc+0x0/0xa4) from [<c0211218>] (sk_prot_alloc+0x28/0xe4)
[ 2907.120000]  r7:c71d8040 r6:c7814860 r5:c37bd660 r4:c03953f8
[ 2907.120000] [<c02111f0>] (sk_prot_alloc+0x0/0xe4) from [<c0212190>] (sk_clone+0x1c/0x2d0)
[ 2907.120000]  r6:c71d8040 r5:c37bd660 r4:00000000
[ 2907.120000] [<c0212174>] (sk_clone+0x0/0x2d0) from [<c0248294>] (inet_csk_clone+0x18/0x90)
[ 2907.120000]  r7:c37bd660 r6:c71d8040 r5:c37bd660 r4:00000000
[ 2907.120000] [<c024827c>] (inet_csk_clone+0x0/0x90) from [<c025d78c>] (tcp_create_openreq_child+0x20/0x384)
[ 2907.120000]  r5:c37bd660 r4:00000000
[ 2907.120000] [<c025d76c>] (tcp_create_openreq_child+0x0/0x384) from [<c025b71c>] (tcp_v4_syn_recv_sock+0x60/0x1e0)
[ 2907.120000] [<c025b6bc>] (tcp_v4_syn_recv_sock+0x0/0x1e0) from [<c025d59c>] (tcp_check_req+0x258/0x428)
[ 2907.120000]  r8:c73bdcc0 r7:00001000 r6:c71d8040 r5:c37bd660 r4:00000000
[ 2907.120000] [<c025d344>] (tcp_check_req+0x0/0x428) from [<c025ae7c>] (tcp_v4_do_rcv+0x1d4/0x30c)
[ 2907.120000] [<c025aca8>] (tcp_v4_do_rcv+0x0/0x30c) from [<c025d1d0>] (tcp_v4_rcv+0x6fc/0x768)
[ 2907.120000] [<c025cad4>] (tcp_v4_rcv+0x0/0x768) from [<c023e838>] (ip_local_deliver_finish+0x18c/0x290)
[ 2907.120000] [<c023e6ac>] (ip_local_deliver_finish+0x0/0x290) from [<c023ed68>] (ip_local_deliver+0x90/0xa4)
[ 2907.120000]  r6:c08f9d60 r5:c6803a58 r4:c6803a58
[ 2907.120000] [<c023ecd8>] (ip_local_deliver+0x0/0xa4) from [<c023e67c>] (ip_rcv_finish+0x394/0x3c4)
[ 2907.120000]  r4:c73bdcac
[ 2907.120000] [<c023e2e8>] (ip_rcv_finish+0x0/0x3c4) from [<c023eca0>] (ip_rcv+0x25c/0x294)
[ 2907.120000] [<c023ea44>] (ip_rcv+0x0/0x294) from [<c021c368>] (netif_receive_skb+0x324/0x3a0)
[ 2907.120000]  r7:c03967cc r6:c6803a58 r5:c08fa2b4 r4:00000008
[ 2907.120000] [<c021c044>] (netif_receive_skb+0x0/0x3a0) from [<c021c874>] (napi_gro_receive+0x3c/0x54)
[ 2907.120000] [<c021c838>] (napi_gro_receive+0x0/0x54) from [<c021c958>] (process_backlog+0x90/0xe4)
[ 2907.120000]  r4:c08fa26c
[ 2907.120000] [<c021c8c8>] (process_backlog+0x0/0xe4) from [<c021f028>] (net_rx_action+0x78/0x16c)
[ 2907.120000]  r7:c03dba60 r6:c4a42000 r5:00000040 r4:c08fa26c
[ 2907.120000] [<c021efb0>] (net_rx_action+0x0/0x16c) from [<c0048618>] (__do_softirq+0x70/0x118)
[ 2907.120000] [<c00485a8>] (__do_softirq+0x0/0x118) from [<c004870c>] (do_softirq+0x4c/0x58)
[ 2907.120000] [<c00486c0>] (do_softirq+0x0/0x58) from [<c0048d30>] (local_bh_enable+0x8c/0xbc)
[ 2907.120000]  r4:00001000
[ 2907.120000] [<c0048ca4>] (local_bh_enable+0x0/0xbc) from [<c0220328>] (dev_queue_xmit+0x490/0x4f4)
[ 2907.120000]  r4:00001000
[ 2907.120000] [<c021fe98>] (dev_queue_xmit+0x0/0x4f4) from [<c0242db8>] (ip_finish_output+0x264/0x2b4)
[ 2907.120000]  r8:00000000 r7:00000000 r6:0000000e r5:c6803a58 r4:c70547a0
[ 2907.120000] [<c0242b54>] (ip_finish_output+0x0/0x2b4) from [<c0243198>] (ip_output+0xc4/0xd8)
[ 2907.120000] [<c02430d4>] (ip_output+0x0/0xd8) from [<c0242790>] (ip_local_out+0x34/0x40)
[ 2907.120000]  r6:00000000 r5:c6a76080 r4:c6803a58
[ 2907.120000] [<c024275c>] (ip_local_out+0x0/0x40) from [<c0243524>] (ip_queue_xmit+0x2bc/0x328)
[ 2907.120000]  r4:c73bdcac
[ 2907.120000] [<c0243268>] (ip_queue_xmit+0x0/0x328) from [<c0255c90>] (tcp_transmit_skb+0x754/0x7c0)
[ 2907.120000] [<c025553c>] (tcp_transmit_skb+0x0/0x7c0) from [<c025744c>] (tcp_write_xmit+0x894/0x9b0)
[ 2907.120000] [<c0256bb8>] (tcp_write_xmit+0x0/0x9b0) from [<c02575a4>] (__tcp_push_pending_frames+0x3c/0x12c)
[ 2907.120000] [<c0257568>] (__tcp_push_pending_frames+0x0/0x12c) from [<c024b72c>] (tcp_sendmsg+0x9a8/0xb18)
[ 2907.120000]  r7:c0947740 r6:0000000c r5:c6a76080 r4:c68039a0
[ 2907.120000] [<c024ad84>] (tcp_sendmsg+0x0/0xb18) from [<c020dcec>] (sock_aio_write+0xd8/0xe0)
[ 2907.120000] [<c020dc14>] (sock_aio_write+0x0/0xe0) from [<c009d524>] (do_sync_readv_writev+0xbc/0x110)
[ 2907.120000]  r8:c4a43f78 r7:c4a43ee4 r6:00000000 r5:00000000 r4:c4a43e18
[ 2907.120000] [<c009d468>] (do_sync_readv_writev+0x0/0x110) from [<c009dc90>] (do_readv_writev+0xb4/0x1b4)
[ 2907.120000] [<c009dbdc>] (do_readv_writev+0x0/0x1b4) from [<c009de00>] (vfs_writev+0x70/0x80)
[ 2907.120000] [<c009dd90>] (vfs_writev+0x0/0x80) from [<c009e2c8>] (sys_writev+0x4c/0x7c)
[ 2907.120000]  r6:00000000 r5:00000000 r4:c7b01520
[ 2907.120000] [<c009e27c>] (sys_writev+0x0/0x7c) from [<c0029e40>] (ret_fast_syscall+0x0/0x2c)
[ 2907.120000]  r6:00000003 r5:be8f1a08 r4:00000001
[ 2907.120000] Mem-info:
[ 2907.120000] Normal per-cpu:
[ 2907.120000] CPU    0: hi:   42, btch:   7 usd:   8
[ 2907.120000] Active_anon:2812 active_file:1002 inactive_anon:5569
[ 2907.120000]  inactive_file:16646 unevictable:0 dirty:1249 writeback:0 unstable:0
[ 2907.120000]  free:496 slab:2538 mapped:1837 pagetables:181 bounce:0
[ 2907.120000] Normal free:1984kB min:1440kB low:1800kB high:2160kB active_anon:11248kB inactive_anon:22276kB active_file:4008kB inactive_file:66584kB unevictable:0kB present:130048kB pages_scanned:0 all_unreclaimable? no
[ 2907.120000] lowmem_reserve[]: 0 0
[ 2907.120000] Normal: 440*4kB 10*8kB 1*16kB 2*32kB 1*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1984kB
[ 2907.120000] 17755 total pagecache pages
[ 2907.120000] 0 pages in swap cache
[ 2907.120000] Swap cache stats: add 0, delete 0, find 0/0
[ 2907.120000] Free swap  = 0kB
[ 2907.120000] Total swap = 0kB
[ 2907.120000] 32768 pages of RAM
[ 2907.120000] 684 free pages
[ 2907.120000] 2686 reserved pages
[ 2907.120000] 2538 slab pages
[ 2907.120000] 19988 pages shared
[ 2907.120000] 0 pages swap cached
[ 2921.700000] FAT: bogus number of reserved sectors
[ 2921.700000] VFS: Can't find a valid FAT filesystem on dev mmcblk0p2.
[ 2921.715000] FAT: bogus number of reserved sectors
[ 2921.715000] VFS: Can't find a valid FAT filesystem on dev mmcblk0p2.
[ 4268.350000] Alignment trap: gpe-sketchbook (8385) PC=0x40725884 Instr=0x15843000 Address=0xbec2a12b FSR 0x813
[ 4556.570000] mapped channel 10 to 2
[ 4577.775000] mapped channel 10 to 2

je vois aussi ceci VFS: Can't find a valid FAT filesystem on dev mmcblk0p2.
que je trouve anormal puisque je veux du ext2

Dernière modification par lilington (29-04-2009 11:11:16)

Hors ligne

 

#4 29-04-2009 11:27:00

misc
Addicted-Moko
Lieu: Clamart
Date d'inscription: 10-04-2009
Messages: 724

Re: echec a l'installation de debian

Visiblement, y a un probléme d'allocation de mémoire, si je lit bien le message :

[ 2907.120000] xset: page allocation failure. order:1, mode:0x20
suivi d'une stack trace longue comme un jour sans pain.

Tu peut sans doute mettre plus que 32 Mo pour la swap ?

Hors ligne

 

#5 29-04-2009 13:46:36

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon j'ai encore et encore tester et cette fois c'est passe. j'ai eu une autre erreur qui me semblait pas importante:

Code:

* copying ssh host key /etc/dropbear/dropbear_rsa_host_key
./install.sh: line 1474: can't create /mnt/debian/etc/dropbear/dropbear_rsa_host_key: Input/output error

autre probleme c'est que j'ai tente de modifier le Uboot comme dans le wiki mais j'ai

Code:

./configure-uboot.sh: line 80: uboot-envedit: command not found

le probleme c'est que sur le wiki il ont dit comment obtenir le paket  uboot-envedit pour ubuntu et debian sous fedora yum ne donne rien.

Hors ligne

 

#6 29-04-2009 14:47:15

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

Je dirais qu'il faut récupérer le paquet debian pour fso-utils puis, soit le convertir en RPM via alien, soit extraire à la main son contenu. Un .deb est une archive ar :

Code:

$ mkdir fso-utils
$ cd fso-utils
$ ar x ../fso-utils_0.git20080812.2_all.deb
$ ls -l
total 20
-rw-r--r-- 1 d40140 septen   562 2009-04-29 13:47 control.tar.gz
-rw-r--r-- 1 d40140 septen 11118 2009-04-29 13:47 data.tar.gz
-rw-r--r-- 1 d40140 septen     4 2009-04-29 13:47 debian-binary

Les fichiers installés par le package sont dans data.tar.gz :

Code:

$ tar tvzf data.tar.gz
drwxr-xr-x root/root         0 2008-08-12 21:53 ./
drwxr-xr-x root/root         0 2008-08-12 21:53 ./usr/
drwxr-xr-x root/root         0 2008-08-12 21:53 ./usr/bin/
-rwxr-xr-x root/root     11780 2008-08-12 20:41 ./usr/bin/mickeyterm
-rwxr-xr-x root/root      7360 2008-08-12 21:37 ./usr/bin/uboot-envedit
-rwxr-xr-x root/root     16155 2008-08-12 20:41 ./usr/bin/mdbus
drwxr-xr-x root/root         0 2008-08-12 21:53 ./usr/share/
drwxr-xr-x root/root         0 2008-08-12 21:53 ./usr/share/doc/
drwxr-xr-x root/root         0 2008-08-12 21:53 ./usr/share/doc/fso-utils/
-rw-r--r-- root/root       192 2008-08-12 21:53 ./usr/share/doc/fso-utils/changelog.gz
drwxr-xr-x root/root         0 2008-08-12 21:53 ./usr/share/fso-python-helpers/
-rw-r--r-- root/root      1406 2008-08-12 20:41 ./usr/share/fso-python-helpers/crc32.pl

Tu devrais pouvoir t'en sortir avec tout ça.

Hors ligne

 

#7 29-04-2009 16:14:26

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

je teste tout ca et je fais un feedback merci

Hors ligne

 

#8 29-04-2009 16:58:09

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon voila, ca a marche merci pour tout.
cependant toujours pas de debian car apparemment l'erreur de toute a l'heure n'etait pas anodine. quand je demande de booter sur la sd j'ai encore shr qui se lance. je vais relancer une installation de debian en essayant d'augmenter la swap je pense que 128 ca devrait aller. la sd est de 4GO

Hors ligne

 

#9 29-04-2009 18:03:57

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

Je ne me rappelle pas avoir jamais eu besoin de swap pour installer une debian sur le FR. Ceci dit, ça fait longtemps que je n'ai pas fait l'exercice... Ça a donc pu changer.

Ce que tu peux faire, c'est stopper un maximum de services sur ta SHR avant de lancer l'install. Par exemple, stopper X, fso, etc... Sachant que les seuls prérequis sont une connexion ssh et un accès internet opérationnels.

Bien vérifier également que la carte SD n'est pas déjà montée par SHR.

Enfin, si ton u-boot est correctement configuré, ce n'est pas normal que la SHR boote quand tu sélectionnes un boot à partir de la SD :
* soit la debian est correctement installée et ça roule
* soit elle ne l'est pas et le FR ne doit simplement pas booter correctement.
Mais il n'y a pas de raison de retomber sur SHR.

C'est tout ce qui me vient à l'esprit là maintenant...

Dernière modification par pini (29-04-2009 18:12:27)

Hors ligne

 

#10 30-04-2009 01:25:01

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

je trouve aussi bizar. j'ai reformater la SD et je vais faire comme tu as dit. je vais stoper pratiquement tout les services , verifier que la SD n'est pas monter et reinstaller Debian. je veux une swap parceque j'ai vu dans le wiki en anglais que ca permettait de regler certain probleme. ceci di je me demande si ce serait pas mieux d'installer etapes par etapes parceque un ./install.sh all qui echoue apres 40mins et je sais meme pas a quelle etape c'est tres fatiguant.

Hors ligne

 

#11 30-04-2009 04:47:16

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon la je craque. les meme erreurs a l'installation de debian a savoir intenal erro: install
sur configuring helper.
je me demande si en reflashant vers OM2008 au lieu de SHR ca me permettrait d'eviter ce probleme.  ce qui'il m'etonne c'est que c'est tres aleatoire. hier c'est passer apres des tonnes d'essais aujourd'hui ca cal au meme endroit

Hors ligne

 

#12 30-04-2009 07:48:25

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

lilington a écrit:

ce qui'il m'etonne c'est que c'est tres aleatoire. hier c'est passer apres des tonnes d'essais aujourd'hui ca cal au meme endroit

C'est ce qui me faisait penser à un pb sur la SD. Mais s'il n'y a pas de trace d'erreur glamo dans dmesg j'avoue que je suis sec... hmm

Hors ligne

 

#13 30-04-2009 08:27:56

SuperZell
Addicted-Moko
Lieu: Montpellier
Date d'inscription: 06-01-2009
Messages: 196
Site web

Re: echec a l'installation de debian

Installe une hackable:1 ou fyp (c'est une debian à la base dans les deux cas).

Hors ligne

 

#14 30-04-2009 10:44:33

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon je vais vous faire un copier coller de tout ce que je tape peut etre que je tape une betise que je ne vois pas:

Code:

 SD_SWAP_SIZE=128 SD_PART1_SIZE=32 ./install.sh all

apres quand je reteste je met debian aulieu de all. le l'erreur est toujours .....

SuperZell a écrit:

Installe une hackable:1 ou fyp (c'est une debian à la base dans les deux cas).

je suis pas encore prets a abandonner mais si ca arrive je crois que je vais suivre ton conseil.

pour le moment je continue avec debian et je tente tout et encore la meme erreur. est-il possbible de telecharger le systeme entierement puis de l'installer en local sans utiliser le script? oubien le resultat sera le meme?

  oubien peut etre que depuis SHR j'ai le probleme et que si je tente depuis OM2008 ou Qextend se sera possible de ne plus voir cette erreur?

Dernière modification par lilington (30-04-2009 11:31:43)

Hors ligne

 

#15 01-05-2009 10:24:25

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

SuperZell a écrit:

Installe une hackable:1 ou fyp (c'est une debian à la base dans les deux cas).

j'ai installer fyp mon but etait d'installer debian de fyp mais la erreur des le test. le probleme avec fyp c;est que les fenetres ont la taille quelle devrait avoir sur un pc donc quand le bouton ok par example est absent de l'ecran y a pas moyen de faire OK. sinon ca avait vraiment l'aire de me correspondre mais serieusement ce probleme de taille de fenetre le rend un peu inutilisable. j'ai vu aussi que cote paquet c'etait le pied. voyons hackable. et j'essayerai encore une installation de debian depuis hackable. mais j'ai vraiment l'impression d'etre seul sur terre a echouer avec debian.

Hors ligne

 

#16 01-05-2009 11:42:12

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

lilington a écrit:

mais j'ai vraiment l'impression d'etre seul sur terre a echouer avec debian.

Je vais tâcher de reproduire ton pb ce w-e en utilisant la SD de 512 Mo pour faire une install. Pour me faciliter le travail, peux-tu me donner un pointeur vers l'image de SHR à flasher pour être à peu près dans les mêms condiftions que toi ?

Hors ligne

 

#17 01-05-2009 12:15:13

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

ben j'ai pris les image et kernel
http://build.shr-project.org/shr-testin … ta02.jffs2
  et
http://build.shr-project.org/shr-testin … latest.bin

cd qui donne les fichiers:  shr-image-om-gta02.jffs2  et  uImage-om-gta02-latest.bin

je flash comme dans la doc : ./dfu-util -a kernel -R -D ../distro/SHR//uImage-om-gta02-latest.bin

depuis la page: http://openmoko-fr.org/wiki/index.php/S … chargement

Hors ligne

 

#18 01-05-2009 12:33:21

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon c'est passe et j'ai eu un autre message:
a l'etape fso 

Code:

 xserver-xorg-input-evdev xserver-xorg-video-fbdev xserver-xorg-input-tslib   xserver-xorg xterm libyaml-0-1 python-yaml mtd-utils  E: There are problems and -y was used without --force-yes

j'ai modifier le fichier ./install.sh en ajoutant -y --force-yes apres la ligneapt-get.....
20 mins plus tard

Code:

gzip: stdout: Read-only file system
debconf: DbDriver "config": could not write /var/cache/debconf/config.dat-new: Read-only file system
dpkg: error processing console-setup (--configure):
 subprocess post-installation script returned error exit status 1
Setting up perl (5.10.0-19) ...
dpkg: unrecoverable fatal error, aborting:
 unable to flush updated status of `perl': Read-only file system

et ca reste bloquer. je signal que je n'ai le prompt, il clignote mais j'ai pas la main

Dernière modification par lilington (01-05-2009 12:40:18)

Hors ligne

 

#19 01-05-2009 21:51:37

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

Bon, j'ai donc flashé la SHR unstable (au passage le terminal graphique est pas pratique du tout avec sa police trop grosse).
Une fois connecté en SSH j'ai stoppé les services suivants (/etc/init.d/<service> stop) :
* xserver-nodm
* fso-monitord
* fso-gpsd
* frameworkd
* bluetooth

Puis j'ai démonté les filesystems de la carte microSDHC :

Code:

root@om-gta02 ~ $ umount /media/mmcblk0p2
root@om-gta02 ~ $ umount /media/card/

Récupération du script d'installation Debian :

Code:

root@om-gta02 ~ $ wget -O install.sh http://pkg-fso.alioth.debian.org/freerunner/install.sh
Connecting to pkg-fso.alioth.debian.org (217.196.43.134:80)
install.sh           100% |****************************************************************************************************************************************************| 43027  --:--:-- ETA
root@om-gta02 ~ $ chmod +x install.sh

Premières étapes de l'Installation pas à pas, jusqu'au formatage de la carte SD :

Code:

root@om-gta02 ~ $ export INST_MIRROR=http://ftp.fr.debian.org/debian 
root@om-gta02 ~ $ ./install.sh testing
chroot: can't change root directory to /mnt/debian: No such file or directory
Running stage testing
Testing system setup
 * microSD card device: /dev/mmcblk0 present
W: tar does not support gzip archives
Downloading tar package
Connecting to ftp.fr.debian.org (212.27.32.66:80)
tar.deb              100% |****************************************************************************************************************************************************|   772k 00:00:00 ETA
 * network running
I: System setup looks good
I: Done with stage testing
root@om-gta02 ~ $ ./install.sh time   
chroot: can't change root directory to /mnt/debian: No such file or directory
Running stage time
Fetching time from ntp.fu-berlin.de with rdate
Warning: Permanently added '192.168.0.202' (RSA) to the list of known hosts.
I: Time is now Fri May  1 17:45:33 CEST 2009
I: Done with stage time
root@om-gta02 ~ $ ./install.sh partition
chroot: can't change root directory to /mnt/debian: No such file or directory
Running stage partition
Starting to partition the microSD card

***********
* WARNING *
***********

This will destroy all the data on the microSD card!!!

Press any key within 5 seconds to quit
 * Clearing MBR of SD.
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.


The number of cylinders for this disk is set to 15568.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

got EOF thrice - exiting..
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.


The number of cylinders for this disk is set to 15568.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

got EOF thrice - exiting..
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.


The number of cylinders for this disk is set to 15568.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-15568, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-15568, default 15568): 
Command (m for help): Selected partition 1
Hex code (type L to list codes): 
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (246-15568, default 246): Using default value 246
Last cylinder or +size or +sizeM or +sizeK (246-15568, default 15568): 
Command (m for help): Partition number (1-4): Hex code (type L to list codes): 
Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
Partitioning was successful.
 * Waiting for partitions to appear
 * Partition table created
I: Done with stage partition
root@om-gta02 ~ $ ./install.sh format   
chroot: can't change root directory to /mnt/debian: No such file or directory
Running stage format

Starting to format the microSD card

***********
* WARNING *
***********

This will destroy all the data on the microSD card!!!

Press any key within 5 seconds to quit
 * Formatting the microSD card partitions
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1960 inodes, 7832 blocks
391 blocks (4.99%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1960 inodes per group

Writing inode tables: done                            
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 39 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
122880 inodes, 490336 blocks
24516 blocks (5.00%) reserved for the super user
First data block=1
60 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks: 
    8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Writing inode tables: done                            
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
I: microSD card ready
I: Done with stage format

Jusque là ça va... Je test montage et démontage des partitions ainsi créées :

Code:

root@om-gta02 ~ $ mount /dev/mmcblk0p1 /mnt       
root@om-gta02 ~ $ umount /mnt
root@om-gta02 ~ $ mount /dev/mmcblk0p2 /mnt
root@om-gta02 ~ $ umount /mnt

C'est OK. On continue pas à pas avec l'installation :

Code:

root@om-gta02 ~ $ ./install.sh mount
chroot: can't change root directory to /mnt/debian: No such file or directory
Running stage mount
Mounting the newly created system
I: microSD card partitions mounted
I: Done with stage mount
root@om-gta02 ~ $ df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root               252544     94972    157572  38% /
none                     60428        64     60364   0% /dev
shmfs                    60428         0     60428   0% /dev/shm
volatile                 60428       136     60292   0% /var/volatile
/dev/mmcblk0p2          474828      8240    442072   2% /mnt/debian
/dev/mmcblk0p1            7582        13      7178   0% /mnt/debian/boot
root@om-gta02 ~ $ ./install.sh debian
chroot: cannot execute apt-cache: No such file or directory
Running stage debian
Install a basic Debian system
 * Downloading cdebootstrap package
Connecting to ftp.fr.debian.org (212.27.32.66:80)
cdebootstrap.deb     100% |****************************************************************************************************************************************************|   521k 00:00:00 ETA
 * Running cdebootstrap to install the system (might take a while)
I: Can't find keyring debian-archive-keyring.gpg
P: Retrieving Release
P: Retrieving Release.gpg
W: Couldn't validate Release!
P: Parsing Release
P: Retrieving Packages.gz
P: Validating Packages.gz
P: Parsing Packages
P: Retrieving gcc-4.3-base
P: Validating gcc-4.3-base
P: Retrieving libgcc1
P: Validating libgcc1
P: Retrieving libc6
P: Validating libc6
P: Retrieving libstdc++6
P: Validating libstdc++6
P: Retrieving libbz2-1.0
P: Validating libbz2-1.0
P: Retrieving readline-common
P: Validating readline-common
P: Retrieving libncurses5
P: Validating libncurses5
P: Retrieving libreadline5
P: Validating libreadline5
P: Retrieving libusb-0.1-4
P: Validating libusb-0.1-4
P: Retrieving zlib1g
P: Validating zlib1g
P: Retrieving gpgv
P: Validating gpgv
P: Retrieving gnupg
P: Validating gnupg
P: Retrieving debian-archive-keyring
P: Validating debian-archive-keyring
P: Retrieving apt
P: Validating apt
P: Retrieving base-passwd
P: Validating base-passwd
P: Retrieving mawk
P: Validating mawk
P: Retrieving base-files
P: Validating base-files
P: Retrieving sensible-utils
P: Validating sensible-utils
P: Retrieving debianutils
P: Validating debianutils
P: Retrieving bash
P: Validating bash
P: Retrieving bsdutils
P: Validating bsdutils
P: Retrieving libattr1
P: Validating libattr1
P: Retrieving libacl1
P: Validating libacl1
P: Retrieving libselinux1
P: Validating libselinux1
P: Retrieving coreutils
P: Validating coreutils
P: Retrieving diff
P: Validating diff
P: Retrieving lzma
P: Validating lzma
P: Retrieving dpkg
P: Validating dpkg
P: Retrieving dropbear
P: Validating dropbear
P: Retrieving libcomerr2
P: Validating libcomerr2
P: Retrieving e2fslibs
P: Validating e2fslibs
P: Retrieving perl-base
P: Validating perl-base
P: Retrieving liblocale-gettext-perl
P: Validating liblocale-gettext-perl
P: Retrieving libtext-iconv-perl
P: Validating libtext-iconv-perl
P: Retrieving libtext-charwidth-perl
P: Validating libtext-charwidth-perl
P: Retrieving libtext-wrapi18n-perl
P: Validating libtext-wrapi18n-perl
P: Retrieving debconf-i18n
P: Validating debconf-i18n
P: Retrieving debconf
P: Validating debconf
P: Retrieving libpam-runtime
P: Validating libpam-runtime
P: Retrieving libpam0g
P: Validating libpam0g
P: Retrieving libdb4.7
P: Validating libdb4.7
P: Retrieving libpam-modules
P: Validating libpam-modules
P: Retrieving passwd
P: Validating passwd
P: Retrieving libuuid1
P: Validating libuuid1
P: Retrieving libblkid1
P: Validating libblkid1
P: Retrieving libss2
P: Validating libss2
P: Retrieving e2fsprogs
P: Validating e2fsprogs
P: Retrieving findutils
P: Validating findutils
P: Retrieving grep
P: Validating grep
P: Retrieving gzip
P: Validating gzip
P: Retrieving hostname
P: Validating hostname
P: Retrieving net-tools
P: Validating net-tools
P: Retrieving sed
P: Validating sed
P: Retrieving ncurses-bin
P: Validating ncurses-bin
P: Retrieving lsb-base
P: Validating lsb-base
P: Retrieving ifupdown
P: Validating ifupdown
P: Retrieving login
P: Validating login
P: Retrieving mktemp
P: Validating mktemp
P: Retrieving module-init-tools
P: Validating module-init-tools
P: Retrieving mount
P: Validating mount
P: Retrieving ncurses-base
P: Validating ncurses-base
P: Retrieving netbase
P: Validating netbase
P: Retrieving libedit2
P: Validating libedit2
P: Retrieving libkeyutils1
P: Validating libkeyutils1
P: Retrieving libkrb5support0
P: Validating libkrb5support0
P: Retrieving libk5crypto3
P: Validating libk5crypto3
P: Retrieving libkrb5-3
P: Validating libkrb5-3
P: Retrieving libgssapi-krb5-2
P: Validating libgssapi-krb5-2
P: Retrieving libdes425-3
P: Validating libdes425-3
P: Retrieving libkrb53
P: Validating libkrb53
P: Retrieving libssl0.9.8
P: Validating libssl0.9.8
P: Retrieving adduser
P: Validating adduser
P: Retrieving openssh-client
P: Validating openssh-client
P: Retrieving procps
P: Validating procps
P: Retrieving libsepol1
P: Validating libsepol1
P: Retrieving sysvinit-utils
P: Validating sysvinit-utils
P: Retrieving initscripts
P: Validating initscripts
P: Retrieving sysv-rc
P: Validating sysv-rc
P: Retrieving sysvinit
P: Validating sysvinit
P: Retrieving tar
P: Validating tar
P: Retrieving libvolume-id1
P: Validating libvolume-id1
P: Retrieving udev
P: Validating udev
P: Retrieving tzdata
P: Validating tzdata
P: Retrieving libslang2
P: Validating libslang2
P: Retrieving util-linux
P: Validating util-linux
P: Retrieving vim-common
P: Validating vim-common
P: Retrieving vim-tiny
P: Validating vim-tiny
P: Retrieving wget
P: Validating wget
P: Extracting gcc-4.3-base
P: Extracting libc6
P: Extracting libgcc1
P: Extracting libstdc++6
P: Extracting libncurses5
P: Extracting zlib1g
P: Extracting base-passwd
P: Extracting mawk
P: Extracting base-files
P: Extracting sensible-utils
P: Extracting debianutils
P: Extracting bash
P: Extracting bsdutils
P: Extracting libattr1
P: Extracting libacl1
P: Extracting libselinux1
P: Extracting coreutils
P: Extracting diff
P: Extracting lzma
P: Extracting dpkg
P: Extracting libcomerr2
P: Extracting e2fslibs
P: Extracting perl-base
P: Extracting liblocale-gettext-perl
P: Extracting libtext-iconv-perl
P: Extracting libtext-charwidth-perl
P: Extracting libtext-wrapi18n-perl
P: Extracting debconf
P: Extracting debconf-i18n
P: Extracting libpam-runtime
P: Extracting libpam0g
P: Extracting libdb4.7
P: Extracting libpam-modules
P: Extracting passwd
P: Extracting libuuid1
P: Extracting libblkid1
P: Extracting libss2
P: Extracting e2fsprogs
P: Extracting findutils
P: Extracting grep
P: Extracting gzip
P: Extracting hostname
P: Extracting sed
P: Extracting ncurses-bin
P: Extracting lsb-base
P: Extracting login
P: Extracting mktemp
P: Extracting mount
P: Extracting ncurses-base
P: Extracting procps
P: Extracting libsepol1
P: Extracting sysvinit-utils
P: Extracting initscripts
P: Extracting sysv-rc
P: Extracting sysvinit
P: Extracting tar
P: Extracting libvolume-id1
P: Extracting tzdata
P: Extracting libslang2
P: Extracting util-linux
P: Unpacking package dpkg
P: Configuring package dpkg
P: Configuring helper cdebootstrap-helper-rc.d
P: Configuring helper cdebootstrap-helper-makedev
P: Unpacking package gcc-4.3-base
P: Unpacking package libc6
P: Unpacking package libgcc1
P: Unpacking package libstdc++6
P: Unpacking package libncurses5
P: Unpacking package zlib1g
P: Unpacking package base-passwd
P: Unpacking package mawk
P: Unpacking package base-files
P: Unpacking package sensible-utils
P: Unpacking package debianutils
P: Unpacking package bash
P: Unpacking package bsdutils
P: Unpacking package libattr1
P: Unpacking package libacl1
P: Unpacking package libselinux1
P: Unpacking package coreutils
P: Unpacking package diff
P: Unpacking package lzma
P: Unpacking package libcomerr2
P: Unpacking package e2fslibs
P: Unpacking package perl-base
P: Unpacking package liblocale-gettext-perl
P: Unpacking package libtext-iconv-perl
P: Unpacking package libtext-charwidth-perl
P: Unpacking package libtext-wrapi18n-perl
P: Unpacking package debconf
P: Unpacking package debconf-i18n
P: Unpacking package libpam-runtime
P: Unpacking package libpam0g
P: Unpacking package libdb4.7
P: Unpacking package libpam-modules
P: Unpacking package passwd
P: Unpacking package libuuid1
P: Unpacking package libblkid1
P: Unpacking package libss2
P: Unpacking package e2fsprogs
P: Unpacking package findutils
P: Unpacking package grep
P: Unpacking package gzip
P: Unpacking package hostname
P: Unpacking package sed
P: Unpacking package ncurses-bin
P: Unpacking package lsb-base
P: Unpacking package login
P: Unpacking package mktemp
P: Unpacking package mount
P: Unpacking package ncurses-base
P: Unpacking package procps
P: Unpacking package libsepol1
P: Unpacking package sysvinit-utils
P: Unpacking package initscripts
P: Unpacking package sysv-rc
P: Unpacking package sysvinit
P: Unpacking package tar
P: Unpacking package libvolume-id1
P: Unpacking package tzdata
P: Unpacking package libslang2
P: Unpacking package util-linux
P: Configuring package sensible-utils
P: Configuring package sysv-rc
P: Configuring package gcc-4.3-base
P: Configuring package libc6
P: Configuring package mktemp
P: Configuring package debianutils
P: Configuring package bsdutils
P: Configuring package libsepol1
P: Configuring package libgcc1
P: Configuring package libncurses5
P: Configuring package libattr1
P: Configuring package sed
P: Configuring package base-passwd
P: Configuring package libcomerr2
P: Configuring package mawk
P: Configuring package libdb4.7
P: Configuring package grep
P: Configuring package hostname
P: Configuring package libacl1
P: Configuring package libslang2
P: Configuring package libss2
P: Configuring package findutils
P: Configuring package gzip
P: Configuring package diff
P: Configuring package libvolume-id1
P: Configuring package libselinux1
P: Configuring package libstdc++6
P: Configuring package coreutils
P: Configuring package lzma
P: Configuring package ncurses-base
P: Configuring package ncurses-bin
P: Configuring package perl-base
P: Configuring package tar
P: Configuring package zlib1g
P: Configuring package base-files
P: Configuring package libtext-iconv-perl
P: Configuring package e2fslibs
P: Configuring package liblocale-gettext-perl
P: Configuring package sysvinit-utils
P: Configuring package bash
P: Configuring package libtext-charwidth-perl
P: Configuring package libtext-wrapi18n-perl
P: Configuring package lsb-base
P: Configuring package procps
P: Configuring package debconf-i18n
P: Configuring package debconf
P: Configuring package tzdata
P: Configuring package libpam-runtime
P: Configuring package libpam0g
P: Configuring package libpam-modules
P: Configuring package passwd
P: Configuring package login
P: Configuring package libuuid1
P: Configuring package libblkid1
P: Configuring package e2fsprogs
P: Configuring package util-linux
P: Configuring package mount
P: Configuring package initscripts
P: Configuring package sysvinit
P: Unpacking package libbz2-1.0
P: Unpacking package readline-common
P: Unpacking package libreadline5
P: Unpacking package libusb-0.1-4
P: Unpacking package gpgv
P: Unpacking package gnupg
P: Unpacking package debian-archive-keyring
P: Unpacking package apt
P: Configuring package libbz2-1.0
P: Configuring package readline-common
P: Configuring package libreadline5
P: Configuring package libusb-0.1-4
P: Configuring package gpgv
P: Configuring package gnupg
P: Configuring package debian-archive-keyring
P: Configuring package apt
P: Configuring helper cdebootstrap-helper-apt
P: Unpacking package udev
P: Unpacking package adduser
P: Unpacking package net-tools
P: Unpacking package ifupdown
P: Unpacking package libssl0.9.8
P: Unpacking package module-init-tools
P: Unpacking package netbase
P: Unpacking package vim-common
P: Unpacking package vim-tiny
P: Unpacking package wget
P: Unpacking package libkeyutils1
P: Unpacking package libkrb5support0
P: Unpacking package libk5crypto3
P: Unpacking package libkrb5-3
P: Unpacking package libdes425-3
P: Unpacking package libedit2
P: Unpacking package libgssapi-krb5-2
P: Unpacking package libkrb53
P: Unpacking package openssh-client
P: Unpacking package dropbear
P: Configuring package udev
P: Configuring package adduser
P: Configuring package net-tools
P: Configuring package ifupdown
P: Configuring package libssl0.9.8
P: Configuring package module-init-tools
P: Configuring package netbase
P: Configuring package vim-common
P: Configuring package vim-tiny
P: Configuring package wget
P: Configuring package libkeyutils1
P: Configuring package libkrb5support0
P: Configuring package libk5crypto3
P: Configuring package libkrb5-3
P: Configuring package libdes425-3
P: Configuring package libedit2
P: Configuring package libgssapi-krb5-2
P: Configuring package libkrb53
P: Configuring package openssh-client
P: Configuring package dropbear
P: Deconfiguring helper cdebootstrap-helper-apt
P: Deconfiguring helper cdebootstrap-helper-makedev
P: Writing apt sources.list
P: Writing hosts
P: Writing resolv.conf
I: Basic Debian system installed
I: Done with stage debian
root@om-gta02 ~ $ ./install.sh apt   
W: Unable to locate package xserver-xorg-video-all
E: No packages found
Running stage apt
Configuring APT
 * Creating /etc/apt/sources.list
 * Install APT recommends by default: false
 * Learning public key for pkg-fso-keyring
OK
 * Updating APT database
Get:1 http://ftp.fr.debian.org unstable Release.gpg [197B]
Get:2 http://pkg-fso.alioth.debian.org unstable Release.gpg [197B]
Get:3 http://pkg-fso.alioth.debian.org unstable Release [3024B]
Get:4 http://ftp.fr.debian.org experimental Release.gpg [197B]
Get:5 http://ftp.fr.debian.org unstable Release [94.4kB]                  
Get:6 http://ftp.fr.debian.org experimental Release [92.3kB]              
Get:7 http://pkg-fso.alioth.debian.org unstable/main Packages [14.3kB]       
Get:8 http://ftp.fr.debian.org unstable/main Packages [7357kB]                                 
Get:9 http://ftp.fr.debian.org experimental/main Packages [357kB]                                                                                                                                   
Fetched 7919kB in 59s (134kB/s)                                                                                                                                                                     
Reading package lists... Done
 * Installing pkg-fso keyring
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  pkg-fso-keyring
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 2800B of archives.
After this operation, 49.2kB of additional disk space will be used.
Get:1 http://pkg-fso.alioth.debian.org unstable/main pkg-fso-keyring 2008.09.27 [2800B]
Fetched 2800B in 0s (12.4kB/s)   
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package pkg-fso-keyring.
(Reading database ... 6440 files and directories currently installed.)
Unpacking pkg-fso-keyring (from .../pkg-fso-keyring_2008.09.27_all.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up pkg-fso-keyring (2008.09.27) ...
OK
 * Removing additional packages
Hit http://ftp.fr.debian.org unstable Release.gpg
Hit http://pkg-fso.alioth.debian.org unstable Release.gpg
Hit http://pkg-fso.alioth.debian.org unstable Release
Hit http://ftp.fr.debian.org experimental Release.gpg
Hit http://ftp.fr.debian.org unstable Release                           
Hit http://ftp.fr.debian.org experimental Release                       
Ign http://pkg-fso.alioth.debian.org unstable/main Packages/DiffIndex
Hit http://pkg-fso.alioth.debian.org unstable/main Packages
Get:1 http://ftp.fr.debian.org unstable/main Packages/DiffIndex [2038B]  
Get:2 http://ftp.fr.debian.org experimental/main Packages/DiffIndex [2023B]                                                                                                                         
Fetched 4061B in 9s (423B/s)                                                                                                                                                                        
Reading package lists... Done
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages will be REMOVED:
  cdebootstrap-helper-rc.d*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 0B of additional disk space will be used.
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 6445 files and directories currently installed.)
Removing cdebootstrap-helper-rc.d ...
I: APT configured
I: Done with stage apt

OK. On passe à l'étape fso (je ne copie-colle pas tout sinon mon post est trop gros) :

Code:

root@om-gta02 ~ $ ./install.sh fso
Running stage fso
Installing FSO-specific packages
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package xserver-xorg-input-all is not installed, so not removed
Package xserver-xorg-input-synaptics is not installed, so not removed
Package xserver-xorg-input-wacom is not installed, so not removed
Package xserver-xorg-video-all is not installed, so not removed
Package xserver-xorg-video-apm is not installed, so not removed
Package xserver-xorg-video-ark is not installed, so not removed
Package xserver-xorg-video-ati is not installed, so not removed
Package xserver-xorg-video-chips is not installed, so not removed
Package xserver-xorg-video-cirrus is not installed, so not removed
Package xserver-xorg-video-i128 is not installed, so not removed
Package xserver-xorg-video-i740 is not installed, so not removed
Package xserver-xorg-video-mga is not installed, so not removed
Package xserver-xorg-video-neomagic is not installed, so not removed
Package xserver-xorg-video-nv is not installed, so not removed
Package xserver-xorg-video-radeonhd is not installed, so not removed
Package xserver-xorg-video-rendition is not installed, so not removed
Package xserver-xorg-video-s3 is not installed, so not removed
Package xserver-xorg-video-s3virge is not installed, so not removed
Package xserver-xorg-video-savage is not installed, so not removed
Package xserver-xorg-video-siliconmotion is not installed, so not removed
Package xserver-xorg-video-sis is not installed, so not removed
Package xserver-xorg-video-sisusb is not installed, so not removed
Package xserver-xorg-video-tdfx is not installed, so not removed
Package xserver-xorg-video-trident is not installed, so not removed
Package xserver-xorg-video-tseng is not installed, so not removed
Package xserver-xorg-video-v4l is not installed, so not removed
Package xserver-xorg-video-vesa is not installed, so not removed
Package xserver-xorg-video-voodoo is not installed, so not removed
The following extra packages will be installed:
  acl alsa-utils apmd console-common console-data console-setup console-terminus consolekit cpp cpp-4.3 dbus defoma file fontconfig fontconfig-config fso-gsm0710muxd gstreamer0.10-alsa hal
  hal-info kbd libapm1 libasound2 libatk1.0-0 libaudit0 libblas3gf libcairo2 libck-connector0 libcroco3 libcups2 libdatrie1 libdb4.5 libdb4.6 libdbus-1-3 libdbus-glib-1-2 libdirectfb-1.2-0
  libdrm2 libecore-0.9.9.050a libecore-evas0 libecore-fb0 libecore-imf0 libecore-job0 libecore-txt0 libecore-x0 libedbus-0.5.0.050b libedje-0.9.9.050a libeet1 libeina-0.0.1b libembryo0
  libevas-0.9.9.050b libevas-engines libexpat1 libfakekey0 libffi5 libfontconfig1 libfontenc1 libfreetype6 libgcrypt11 libgdbm3 libgfortran3 libgif4 libglib2.0-0 libgmp3c2 libgnutls26
  libgpg-error0 libgsf-1-114 libgsf-1-common libgstreamer-plugins-base0.10-0 libgstreamer0.10-0 libgtk2.0-0 libgtk2.0-common libhal-storage1 libhal1 libice6 libicu40 libjasper1 libjpeg62
  liblapack3gf liblzo2-2 libmagic1 libmatchbox1 libmpfr1ldbl libncursesw5 libnewt0.52 libnotify1 libpango1.0-0 libpango1.0-common libpcap0.8 libpci3 libpciaccess0 libpcre3 libpixman-1-0
  libpng12-0 libpolkit-dbus2 libpolkit-grant2 libpolkit2 libpopt0 librsvg2-2 libsm6 libsqlite3-0 libstartup-notification0 libsysfs2 libtasn1-3 libthai-data libthai0 libtiff4 libts-0.0-0 libx11-6
  libx11-data libxau6 libxaw7 libxcb-atom1 libxcb-aux0 libxcb-event1 libxcb-render-util0 libxcb-render0 libxcb1 libxcomposite1 libxcursor1 libxdamage1 libxdmcp6 libxext6 libxfixes3 libxfont1
  libxft2 libxi6 libxinerama1 libxkbfile1 libxml2 libxmu6 libxmuu1 libxp6 libxpm4 libxrandr2 libxrender1 libxsettings-client0 libxss1 libxt6 libxtrap6 libxtst6 libxxf86misc1 libxxf86vm1
  libyaml-0-1 linux-sound-base matchbox-keyboard mime-support pciutils perl perl-modules pm-utils policykit powermgmt-base ppp python python-cairo python-central python-dbus python-ecore
  python-edbus python-edje python-evas python-gobject python-gst0.10 python-gtk2 python-libxml2 python-minimal python-notify python-numpy python-serial python-support python-yaml python2.5
  python2.5-minimal shared-mime-info tsconf ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf usbutils whiptail x11-common x11-xkb-utils xauth xbitmaps xfonts-encodings xfonts-utils xkb-data
  xserver-common xserver-xorg-input-evdev zhone-illume-glue
Suggested packages:
  xapm unicode-data locales cpp-doc gcc-4.3-locales defoma-doc dfontmgr psfontmgr x-ttcidfont-conf gsm0710muxd gnome-device-manager libasound2-plugins cups-common libedje-bin libembryo-bin
  rng-tools gnutls-bin libvisual-0.4-plugins gstreamer-codec-install gnome-codec-install gstreamer0.10-tools gstreamer0.10-plugins librsvg2-common gvfs libjasper-runtime ttf-japanese-gothic
  ttf-japanese-mincho ttf-thryomanes ttf-baekmuk ttf-arphic-gbsn00lp ttf-arphic-bsmi00lp ttf-arphic-gkai00mp ttf-arphic-bkai00mp librsvg2-bin bzip2 perl-doc libterm-readline-gnu-perl
  libterm-readline-perl-perl cpufrequtils policykit-gnome iptables python-doc python-tk python-profiler python-dbus-doc python-dbus-dbg python-gobject-dbg python-gst0.10-dbg python-gtk2-doc
  python-numpy-doc python-numpy-dbg python-nose python-wxgtk2.8 python-wxgtk2.6 python-wxgtk python2.5-doc binfmt-support menu nickle cairo-5c xfs xserver xfonts-100dpi xfonts-75dpi
  xfonts-scalable xfonts-cyrillic
Recommended packages:
  alsa-base libpam-ck-connector libft-perl fso-config fso-sounds eject libatk1.0-data libglib2.0-data hicolor-icon-theme libgtk2.0-bin libgpm2 libfribidi0 notification-daemon xml-core uswsusp
  vbetool radeontool libgl1-mesa-dri x11-utils xutils
The following NEW packages will be installed:
  acl alsa-utils apmd console-common console-data console-setup console-terminus consolekit cpp cpp-4.3 dbus dbus-x11 defoma file fontconfig fontconfig-config fso-frameworkd fso-gpsd
  fso-gsm0710muxd fso-utils gstreamer0.10-alsa hal hal-info kbd libapm1 libasound2 libatk1.0-0 libaudit0 libblas3gf libcairo2 libck-connector0 libcroco3 libcups2 libdatrie1 libdb4.5 libdb4.6
  libdbus-1-3 libdbus-glib-1-2 libdirectfb-1.2-0 libdrm2 libecore-0.9.9.050a libecore-evas0 libecore-fb0 libecore-imf0 libecore-job0 libecore-txt0 libecore-x0 libedbus-0.5.0.050b
  libedje-0.9.9.050a libeet1 libeina-0.0.1b libembryo0 libevas-0.9.9.050b libevas-engines libexpat1 libfakekey0 libffi5 libfontconfig1 libfontenc1 libfreetype6 libgcrypt11 libgdbm3 libgfortran3
  libgif4 libglib2.0-0 libgmp3c2 libgnutls26 libgpg-error0 libgsf-1-114 libgsf-1-common libgstreamer-plugins-base0.10-0 libgstreamer0.10-0 libgtk2.0-0 libgtk2.0-common libhal-storage1 libhal1
  libice6 libicu40 libjasper1 libjpeg62 liblapack3gf liblzo2-2 libmagic1 libmatchbox1 libmpfr1ldbl libncursesw5 libnewt0.52 libnotify1 libpango1.0-0 libpango1.0-common libpcap0.8 libpci3
  libpciaccess0 libpcre3 libpixman-1-0 libpng12-0 libpolkit-dbus2 libpolkit-grant2 libpolkit2 libpopt0 librsvg2-2 libsm6 libsqlite3-0 libstartup-notification0 libsysfs2 libtasn1-3 libthai-data
  libthai0 libtiff4 libts-0.0-0 libx11-6 libx11-data libxau6 libxaw7 libxcb-atom1 libxcb-aux0 libxcb-event1 libxcb-render-util0 libxcb-render0 libxcb1 libxcomposite1 libxcursor1 libxdamage1
  libxdmcp6 libxext6 libxfixes3 libxfont1 libxft2 libxi6 libxinerama1 libxkbfile1 libxml2 libxmu6 libxmuu1 libxp6 libxpm4 libxrandr2 libxrender1 libxsettings-client0 libxss1 libxt6 libxtrap6
  libxtst6 libxxf86misc1 libxxf86vm1 libyaml-0-1 linux-sound-base matchbox-keyboard matchbox-window-manager mime-support mtd-utils openmoko-panel-plugin pciutils perl perl-modules pm-utils
  policykit powermgmt-base ppp python python-cairo python-central python-dbus python-ecore python-edbus python-edje python-evas python-gobject python-gst0.10 python-gtk2 python-libxml2
  python-minimal python-notify python-numpy python-serial python-support python-yaml python2.5 python2.5-minimal shared-mime-info trayer tsconf ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ucf
  usbutils whiptail x11-common x11-xkb-utils x11-xserver-utils xauth xbitmaps xfonts-base xfonts-encodings xfonts-utils xinit xkb-data xserver-common xserver-xorg xserver-xorg-core
  xserver-xorg-input-evdev xserver-xorg-input-tslib xserver-xorg-video-fbdev xterm zhone zhone-illume-glue
0 upgraded, 207 newly installed, 0 to remove and 0 not upgraded.
Need to get 78.4MB of archives.
After this operation, 227MB of additional disk space will be used.
Get:1 http://pkg-fso.alioth.debian.org unstable/main libedbus-0.5.0.050b 0.5.0.050+svn20090130-1~fr.1 [28.4kB]
...
Get:207 http://ftp.fr.debian.org unstable/main mtd-utils 20090217-1 [338kB]                                                                                                                         
Fetched 78.4MB in 3min 58s (328kB/s)                                                                                                                                                                
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package console-data.
(Reading database ... 6444 files and directories currently installed.)
Unpacking console-data (from .../console-data_2%3a1.08a-1_all.deb) ...
...
Selecting previously deselected package zhone-illume-glue.
Unpacking zhone-illume-glue (from .../zhone-illume-glue_0-git20090202-2_armel.deb) ...
Selecting previously deselected package zhone.
Unpacking zhone (from .../zhone_0-git20090202-2_all.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up console-data (2:1.08a-1) ...
Looking for keymap to install:
NONE
Setting up xkb-data (1.5-2) ...
...
Setting up zhone (0-git20090202-2) ...
Processing triggers for python-support ...
I: FSO packages installed
I: Done with stage fso

Ça roule. Je shunte l'étape tasks (inutile), et je continue :

Code:

root@om-gta02 ~ $ ./install.sh configuration
Running stage configuration
Configuring system files for gta02
 * Installing the fso-config-gta02 package
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  fso-sounds-openmoko-nonfree gstreamer0.10-plugins-ugly liba52-0.7.4 libcdio7 libdvdread4 libid3tag0 libmad0 libmpeg2-4 liboil0.3 libsidplay1 libtwolame0
Suggested packages:
  libdvdcss2 sidplay-base xsidplay
Recommended packages:
  libdvdnav4
The following NEW packages will be installed:
  fso-config-gta02 fso-sounds-openmoko-nonfree gstreamer0.10-plugins-ugly liba52-0.7.4 libcdio7 libdvdread4 libid3tag0 libmad0 libmpeg2-4 liboil0.3 libsidplay1 libtwolame0
0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
Need to get 1170kB of archives.
After this operation, 3682kB of additional disk space will be used.
Get:1 http://pkg-fso.alioth.debian.org unstable/main fso-sounds-openmoko-nonfree 20080911-5 [111kB]
Get:2 http://ftp.fr.debian.org unstable/main liba52-0.7.4 0.7.4-11 [33.9kB]
Get:3 http://pkg-fso.alioth.debian.org unstable/main fso-config-gta02 20090202-1 [8818B]
Get:4 http://ftp.fr.debian.org unstable/main libcdio7 0.78.2+dfsg1-3 [144kB]
Get:5 http://ftp.fr.debian.org unstable/main libdvdread4 4.1.3-5 [74.6kB]
Get:6 http://ftp.fr.debian.org unstable/main libid3tag0 0.15.1b-10 [33.8kB]
Get:7 http://ftp.fr.debian.org unstable/main libmad0 0.15.1b-4 [79.9kB]
Get:8 http://ftp.fr.debian.org unstable/main libmpeg2-4 0.4.1-3 [61.5kB]
Get:9 http://ftp.fr.debian.org unstable/main liboil0.3 0.3.15-1 [118kB]
Get:10 http://ftp.fr.debian.org unstable/main libsidplay1 1.36.59-5 [75.5kB]
Get:11 http://ftp.fr.debian.org unstable/main libtwolame0 0.3.12-1 [68.7kB]
Get:12 http://ftp.fr.debian.org unstable/main gstreamer0.10-plugins-ugly 0.10.11-1 [360kB]
Fetched 1170kB in 4s (282kB/s)                      
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package liba52-0.7.4.
(Reading database ... 15309 files and directories currently installed.)
Unpacking liba52-0.7.4 (from .../liba52-0.7.4_0.7.4-11_armel.deb) ...
Selecting previously deselected package libcdio7.
Unpacking libcdio7 (from .../libcdio7_0.78.2+dfsg1-3_armel.deb) ...
Selecting previously deselected package libdvdread4.
Unpacking libdvdread4 (from .../libdvdread4_4.1.3-5_armel.deb) ...
Selecting previously deselected package libid3tag0.
Unpacking libid3tag0 (from .../libid3tag0_0.15.1b-10_armel.deb) ...
Selecting previously deselected package libmad0.
Unpacking libmad0 (from .../libmad0_0.15.1b-4_armel.deb) ...
Selecting previously deselected package libmpeg2-4.
Unpacking libmpeg2-4 (from .../libmpeg2-4_0.4.1-3_armel.deb) ...
Selecting previously deselected package liboil0.3.
Unpacking liboil0.3 (from .../liboil0.3_0.3.15-1_armel.deb) ...
Selecting previously deselected package libsidplay1.
Unpacking libsidplay1 (from .../libsidplay1_1.36.59-5_armel.deb) ...
Selecting previously deselected package libtwolame0.
Unpacking libtwolame0 (from .../libtwolame0_0.3.12-1_armel.deb) ...
Selecting previously deselected package gstreamer0.10-plugins-ugly.
Unpacking gstreamer0.10-plugins-ugly (from .../gstreamer0.10-plugins-ugly_0.10.11-1_armel.deb) ...
Selecting previously deselected package fso-sounds-openmoko-nonfree.
Unpacking fso-sounds-openmoko-nonfree (from .../fso-sounds-openmoko-nonfree_20080911-5_all.deb) ...
Selecting previously deselected package fso-config-gta02.
Unpacking fso-config-gta02 (from .../fso-config-gta02_20090202-1_all.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up liba52-0.7.4 (0.7.4-11) ...
Setting up libcdio7 (0.78.2+dfsg1-3) ...
Setting up libdvdread4 (4.1.3-5) ...
Setting up libid3tag0 (0.15.1b-10) ...
Setting up libmad0 (0.15.1b-4) ...
Setting up libmpeg2-4 (0.4.1-3) ...
Setting up liboil0.3 (0.3.15-1) ...
Setting up libsidplay1 (1.36.59-5) ...
Setting up libtwolame0 (0.3.12-1) ...
Setting up gstreamer0.10-plugins-ugly (0.10.11-1) ...
Setting up fso-sounds-openmoko-nonfree (20080911-5) ...
Setting up fso-config-gta02 (20090202-1) ...
 * Creating /etc/X11/xorg.conf
 * Creating /etc/inittab (all but tty1 disabled to save memory)
 * Creating /etc/modules
 * Setting FSCKFIX=yes in /etc/default/rcS
 * Creating /etc/fstab
 * Setting /etc/hostname to debian-gta02
 * /etc/network/interfaces copied from this machine
 * /etc/resolv.conf copied from this machine
 * Setting empty root password
 * copying ssh host key /etc/dropbear/dropbear_rsa_host_key
 * Installing dash as /bin/sh: true
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  dash
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 95.9kB of archives.
After this operation, 225kB of additional disk space will be used.
Get:1 http://ftp.fr.debian.org unstable/main dash 0.5.5.1-2 [95.9kB]
Fetched 95.9kB in 0s (222kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package dash.
(Reading database ... 15472 files and directories currently installed.)
Unpacking dash (from .../dash_0.5.5.1-2_armel.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up dash (0.5.5.1-2) ...
 * Installing /root/.xsession
 * Installing /root/.panel-pluginrc
 * Installing Display Manager nodm
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  nodm
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 15.8kB of archives.
After this operation, 123kB of additional disk space will be used.
Get:1 http://ftp.fr.debian.org unstable/main nodm 0.3-2 [15.8kB]
Fetched 15.8kB in 0s (52.3kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package nodm.
(Reading database ... 15480 files and directories currently installed.)
Unpacking nodm (from .../archives/nodm_0.3-2_armel.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up nodm (0.3-2) ...
I: System configured
I: Done with stage configuration
root@om-gta02 ~ $ ./install.sh kernel       
Running stage kernel
Installing kernel package
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  linux-image-2.6.28-openmoko-gta02
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 4536kB of archives.
After this operation, 10.1MB of additional disk space will be used.
Get:1 http://pkg-fso.alioth.debian.org unstable/main linux-image-2.6.28-openmoko-gta02 20090105.git69b2aa26-3 [4536kB]
Fetched 4536kB in 9s (479kB/s)                                                                                                                                                                      
debconf: delaying package configuration, since apt-utils is not installed
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package linux-image-2.6.28-openmoko-gta02.
(Reading database ... 15490 files and directories currently installed.)
Unpacking linux-image-2.6.28-openmoko-gta02 (from .../linux-image-2.6.28-openmoko-gta02_20090105.git69b2aa26-3_armel.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up linux-image-2.6.28-openmoko-gta02 (20090105.git69b2aa26-3) ...
I: Kernel installed
I: Done with stage kernel

Ne manque plus que unmount. Je dois m'y reprendre à deux fois :

Code:

root@om-gta02 ~ $ ./install.sh unmount
Running stage unmount
Unmounting
 * Unmounting microSD card partitions
umount: /mnt/debian: device is busy
umount: /mnt/debian: device is busy
W: Could not unmount install directory '/mnt/debian'.
root@om-gta02 ~ $ ./install.sh unmount
Running stage unmount
Unmounting
 * Unmounting microSD card partitions
umount: /mnt/debian/boot: not mounted

Et je reboote...

Le scritp d'init d'ALSA n'a pas l'air très content mais à par ça, ça marche. J'ai un zhone fonctionnel.

Hors ligne

 

#20 01-05-2009 22:12:06

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

bon alors je vais pas me prendre la tete. je vais faire exactement la meme chose sans me poser de question merci je test et je te fait le feedback demain la il est deja 4h12 du matin faut que je dormase  Merci d'avoir pris le temps de tout refaire c'est tres gentil. merci

Hors ligne

 

#21 03-05-2009 04:50:24

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

je pense avoir fait exactement les meme manipulation est j'ai :

Code:

Running stage fso
Installing FSO-specific packages
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.

petit detail qui pourait peut etre avoir son importance je me trouve geographiquement en chine. j'utilise pas de MIRROR chinois
car quand j'install debian sur pc ca marche toujours mal. a part le probleme de situtation geographique il n'y pas de difference
entre ce que l'on a fait et pourtant debian n'est toujours pas installer chez moi.

Dernière modification par lilington (03-05-2009 12:19:25)

Hors ligne

 

#22 03-05-2009 17:05:55

roly
Fun-Moko
Lieu: paris
Date d'inscription: 07-04-2009
Messages: 89
Site web

Re: echec a l'installation de debian

t'as essayé de faire rm -f /path-to-sd/var/lib/dpkg/lock et de relancer ?

Hors ligne

 

#23 03-05-2009 17:09:19

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

non mais je vais tester

Hors ligne

 

#24 03-05-2009 22:29:12

pini
Addicted-Moko
Lieu: Lyon
Date d'inscription: 01-09-2008
Messages: 449

Re: echec a l'installation de debian

Le fait d'être en chine ne devrait pas changer quoi que ce soit AMHA.
Juste pour être sûr que ce n'est pas ta carte qui débloque, as-tu essayé une install sur la carte Transcend 512 Mo fournie avec le FR ?

Hors ligne

 

#25 04-05-2009 01:40:26

lilington
Cool-Moko
Date d'inscription: 16-04-2009
Messages: 33

Re: echec a l'installation de debian

non car ca ne m'a pas ete fournie. j'ai eu 3 batteries 2 sacoches 2 oreillettes mais pas de carte. c'est d'ailleur en promo sur le site openmoko officielle.
bon on va supposer que c'est un probleme de carte c'est pas grave je vais en acheter une autre et reessayer
encore merci pour votre patience.

Hors ligne

 

Pied de page des forums

Propulsé par FluxBB 1.2.20
Traduction par FluxBB.fr

Hébergé par :
Bearstech